扫一扫
关注中图网
官方微博
本类五星书更多>
-
>
宇宙、量子和人类心灵
-
>
(精)BBC地球故事系列-星际旅行
-
>
从一到无穷大
-
>
图说相对论(32开平装)
-
>
一本有趣又有料的化学书
-
>
刘薰宇的数学三书:原来数学可以这样学全3册
-
>
光学零件制造工艺学
相平衡.相图和相变-其热力学基础-第二版-(影印版) 版权信息
- ISBN：9787301245552
- 条形码：9787301245552 ; 978-7-301-24555-2
- 装帧：一般胶版纸
- 册数：暂无
- 重量：暂无
- 所属分类：>>
相平衡.相图和相变-其热力学基础-第二版-(影印版) 本书特色
《相平衡、相图和相变——其热力学基础（第二版）（英文影印版）》主要内容为现代计算机应用观点下的热力学基本原理。 化学平衡和化学变化的理论基础也是本书的内容之一，其重点在于相图的性质。本书从基本原理出发，讨论延及多相的系统。第二版新增加的内容包括不可逆热力学、极值原理和表面、界面热力学等等。 平衡条件的理论刻画、系统的平衡状态和达到平衡时的变化都以图解的形式给出。 《相平衡、相图和相变——其热力学基础（第二版）（英文影印版）》适合材料科学与工程领域的研究人员、研究生和高年级本科生阅读。
相平衡.相图和相变-其热力学基础-第二版-(影印版) 内容简介
《相平衡、相图和相变——其热力学基础（第二版）》是影印版英文专著，原书由剑桥大学出版社于2008年出版。相平衡、相变等热力学原理是理解、设计材料属性的基础。计算工具的出现使材料学家能够处理越来越复杂的情况，但对于热力学基础理论的理解也越来越重要。本书图文并茂，深入浅出地讲解了热力学原理以及在计算机计算中的应用，对于材料科学、材料工程方面的研究者会有很大帮助。
相平衡.相图和相变-其热力学基础-第二版-(影印版) 目录
preface to second edition page xii
preface to first edition xiii
1 basic concepts of thermodynamics
1.1 external state variables
1.2 internal state variables
1.3 the first law of thermodynamics
1.4 freezing-in conditions
1.5 reversible and irreversible processes
1.6 second law of thermodynamics
1.7 condition of internal equilibrium
1.8 driving force
1.9 combined first and second law
1.10 general conditions of equilibrium
1.11 characteristic state functions
1.12 entropy
2 manipulation of thermodynamic quantities
2.1 evaluation of one characteristic state function from another
2.2 internal variables at equilibrium
2.3 equations of state
2.4 experimental conditions
2.5 notation for partial derivatives
2.6 use of various derivatives
2.7 comparison between cv and cp
2.8 change of independent variables
2.9 maxwell relations
3 systems with variable composition
3.1 chemical potential
3.2 molar and integral quantities
3.3 more about characteristic state functions
3.4 additivity of extensive quantities. free energy and exergy
3.5 various forms of the combined law
3.6 calculation of equilibrium
3.7 evaluation of the driving force
3.8 driving force for molecular reactions
3.9 evaluation of integrated driving force as function of
t or p
3.10 effective driving force
4 practical handling of multicomponent systems
4.1 partial quantities
4.2 relations for partial quantities
4.3 alternative variables for composition
4.4 the lever rule
4.5 the tie-line rule
4.6 different sets of components
4.7 constitution and constituents
4.8 chemical potentials in a phase with sublattices
5 thermodynamics of processes
5.1 thermodynamic treatment of kinetics of
internal processes
5.2 transformation of the set of processes
5.3 alternative methods of transformation
5.4 basic thermodynamic considerations for processes
5.5 homogeneous chemical reactions
5.6 transport processes in discontinuous systems
5.7 transport processes in continuous systems
5.8 substitutional diffusion
5.9 onsager’s extremum principle
6 stability
6.1 introduction
6.2 some necessary conditions of stability
6.3 sufficient conditions of stability
6.4 summary of stability conditions
6.5 limit of stability
6.6 limit of stability against fluctuations in composition
6.7 chemical capacitance
6.8 limit of stability against fluctuations of
internal variables
6.9 le chatelier’s principle
7 applications of molar gibbs energy diagrams
7.1 molar gibbs energy diagrams for binary systems
7.2 instability of binary solutions
7.3 illustration of the gibbs–duhem relation
7.4 two-phase equilibria in binary systems
7.5 allotropic phase boundaries
7.6 effect of a pressure difference on a two-phase
equilibrium
7.7 driving force for the formation of a new phase
7.8 partitionless transformation under local equilibrium
7.9 activation energy for a fluctuation
7.10 ternary systems
7.11 solubility product
8 phase equilibria and potential phase diagrams
8.1 gibbs’ phase rule
8.2 fundamental property diagram
8.3 topology of potential phase diagrams
8.4 potential phase diagrams in binary and multinary systems
8.5 sections of potential phase diagrams
8.6 binary systems
8.7 ternary systems
8.8 direction of phase fields in potential phase diagrams
8.9 extremum in temperature and pressure
9 molar phase diagrams
9.1 molar axes
9.2 sets of conjugate pairs containing molar variables
9.3 phase boundaries
9.4 sections of molar phase diagrams
9.5 schreinemakers’ rule
9.6 topology of sectioned molar diagrams
10 projected and mixed phase diagrams
10.1 schreinemakers’ projection of potential phase diagrams
10.2 the phase field rule and projected diagrams
10.3 relation between molar diagrams and schreinemakers’
projected diagrams
10.4 coincidence of projected surfaces
10.5 projection of higher-order invariant equilibria
10.6 the phase field rule and mixed diagrams
10.7 selection of axes in mixed diagrams
10.8 konovalov’s rule
10.9 general rule for singular equilibria
11 direction of phase boundaries
11.1 use of distribution coefficient
11.2 calculation of allotropic phase boundaries
11.3 variation of a chemical potential in a two-phase field
11.4 direction of phase boundaries
11.5 congruent melting points
11.6 vertical phase boundaries
11.7 slope of phase boundaries in isothermal sections
11.8 the effect of a pressure difference between two phases
12 sharp and gradual phase transformations
12.1 experimental conditions
12.2 characterization of phase transformations
12.3 microstructural character
12.4 phase transformations in alloys
12.5 classification of sharp phase transformations
12.6 applications of schreinemakers’ projection
12.7 scheil’s reaction diagram
12.8 gradual phase transformations at fixed composition
12.9 phase transformations controlled by a chemical potential
13 transformations in closed systems
13.1 the phase field rule at constant composition
13.2 reaction coefficients in sharp transformations
for p = c +
13.3 graphical evaluation of reaction coefficients
13.4 reaction coefficients in gradual transformations
for p = c
13.5 driving force for sharp phase transformations
13.6 driving force under constant chemical potential
13.7 reaction coefficients at constant chemical potential
13.8 compositional degeneracies for p = c
13.9 effect of two compositional degeneracies for p = c .
14 partitionless transformations
14.1 deviation from local equilibrium
14.2 adiabatic phase transformation
14.3 quasi-adiabatic phase transformation
14.4 partitionless transformations in binary system
14.5 partial chemical equilibrium
14.6 transformations in steel under quasi-paraequilibrium
14.7 transformations in steel under partitioning of alloying elements
15 limit of stability and critical phenomena
15.1 transformations and transitions
15.2 order–disorder transitions
15.3 miscibility gaps
15.4 spinodal decomposition
15.5 tri-critical points
16 interfaces
16.1 surface energy and surface stress
16.2 phase equilibrium at curved interfaces
16.3 phase equilibrium at fluid/fluid interfaces
16.4 size stability for spherical inclusions
16.5 nucleation
16.6 phase equilibrium at crystal/fluid interface
16.7 equilibrium at curved interfaces with regard to composition
16.8 equilibrium for crystalline inclusions with regard to composition
16.9 surface segregation
16.10 coherency within a phase
16.11 coherency between two phases
16.12 solute drag
17 kinetics of transport processes
17.1 thermal activation
17.2 diffusion coefficients
17.3 stationary states for transport processes
17.4 local volume change
17.5 composition of material crossing an interface
17.6 mechanisms of interface migration
17.7 balance of forces and dissipation
18 methods of modelling
18.1 general principles
18.2 choice of characteristic state function
18.3 reference states
18.4 representation of gibbs energy of formation
18.5 use of power series in t
18.6 representation of pressure dependence
18.7 application of physical models
18.8 ideal gas
18.9 real gases
18.10 mixtures of gas species
18.11 black-body radiation
18.12 electron gas
19 modelling of disorder
19.1 introduction
19.2 thermal vacancies in a crystal
19.3 topological disorder
19.4 heat capacity due to thermal vibrations
19.5 magnetic contribution to thermodynamic properties
19.6 a simple physical model for the magnetic contribution
19.7 random mixture of atoms
19.8 restricted random mixture
19.9 crystals with stoichiometric vacancies
19.10 interstitial solutions
20 mathematical modelling of solution phases
20.1 ideal solution
20.2 mixing quantities
20.3 excess quantities
20.4 empirical approach to substitutional solutions
20.5 real solutions
20.6 applications of the gibbs–duhem relation
20.7 dilute solution approximations
20.8 predictions for solutions in higher-order systems
20.9 numerical methods of predictions for higher-order systems
21 solution phases with sublattices
21.1 sublattice solution phases
21.2 interstitial solutions
21.3 reciprocal solution phases
21.4 combination of interstitial and substitutional solution
21.5 phases with variable order
21.6 ionic solid solutions
22 physical solution models
22.1 concept of nearest-neighbour bond energies
22.2 random mixing model for a substitutional solution
22.3 deviation from random distribution
22.4 short-range order
22.5 long-range order
22.6 long- and short-range order
22.7 the compound energy formalism with short-range order
22.8 interstitial ordering
22.9 composition dependence of physical effects
references
index
preface to first edition xiii
1 basic concepts of thermodynamics
1.1 external state variables
1.2 internal state variables
1.3 the first law of thermodynamics
1.4 freezing-in conditions
1.5 reversible and irreversible processes
1.6 second law of thermodynamics
1.7 condition of internal equilibrium
1.8 driving force
1.9 combined first and second law
1.10 general conditions of equilibrium
1.11 characteristic state functions
1.12 entropy
2 manipulation of thermodynamic quantities
2.1 evaluation of one characteristic state function from another
2.2 internal variables at equilibrium
2.3 equations of state
2.4 experimental conditions
2.5 notation for partial derivatives
2.6 use of various derivatives
2.7 comparison between cv and cp
2.8 change of independent variables
2.9 maxwell relations
3 systems with variable composition
3.1 chemical potential
3.2 molar and integral quantities
3.3 more about characteristic state functions
3.4 additivity of extensive quantities. free energy and exergy
3.5 various forms of the combined law
3.6 calculation of equilibrium
3.7 evaluation of the driving force
3.8 driving force for molecular reactions
3.9 evaluation of integrated driving force as function of
t or p
3.10 effective driving force
4 practical handling of multicomponent systems
4.1 partial quantities
4.2 relations for partial quantities
4.3 alternative variables for composition
4.4 the lever rule
4.5 the tie-line rule
4.6 different sets of components
4.7 constitution and constituents
4.8 chemical potentials in a phase with sublattices
5 thermodynamics of processes
5.1 thermodynamic treatment of kinetics of
internal processes
5.2 transformation of the set of processes
5.3 alternative methods of transformation
5.4 basic thermodynamic considerations for processes
5.5 homogeneous chemical reactions
5.6 transport processes in discontinuous systems
5.7 transport processes in continuous systems
5.8 substitutional diffusion
5.9 onsager’s extremum principle
6 stability
6.1 introduction
6.2 some necessary conditions of stability
6.3 sufficient conditions of stability
6.4 summary of stability conditions
6.5 limit of stability
6.6 limit of stability against fluctuations in composition
6.7 chemical capacitance
6.8 limit of stability against fluctuations of
internal variables
6.9 le chatelier’s principle
7 applications of molar gibbs energy diagrams
7.1 molar gibbs energy diagrams for binary systems
7.2 instability of binary solutions
7.3 illustration of the gibbs–duhem relation
7.4 two-phase equilibria in binary systems
7.5 allotropic phase boundaries
7.6 effect of a pressure difference on a two-phase
equilibrium
7.7 driving force for the formation of a new phase
7.8 partitionless transformation under local equilibrium
7.9 activation energy for a fluctuation
7.10 ternary systems
7.11 solubility product
8 phase equilibria and potential phase diagrams
8.1 gibbs’ phase rule
8.2 fundamental property diagram
8.3 topology of potential phase diagrams
8.4 potential phase diagrams in binary and multinary systems
8.5 sections of potential phase diagrams
8.6 binary systems
8.7 ternary systems
8.8 direction of phase fields in potential phase diagrams
8.9 extremum in temperature and pressure
9 molar phase diagrams
9.1 molar axes
9.2 sets of conjugate pairs containing molar variables
9.3 phase boundaries
9.4 sections of molar phase diagrams
9.5 schreinemakers’ rule
9.6 topology of sectioned molar diagrams
10 projected and mixed phase diagrams
10.1 schreinemakers’ projection of potential phase diagrams
10.2 the phase field rule and projected diagrams
10.3 relation between molar diagrams and schreinemakers’
projected diagrams
10.4 coincidence of projected surfaces
10.5 projection of higher-order invariant equilibria
10.6 the phase field rule and mixed diagrams
10.7 selection of axes in mixed diagrams
10.8 konovalov’s rule
10.9 general rule for singular equilibria
11 direction of phase boundaries
11.1 use of distribution coefficient
11.2 calculation of allotropic phase boundaries
11.3 variation of a chemical potential in a two-phase field
11.4 direction of phase boundaries
11.5 congruent melting points
11.6 vertical phase boundaries
11.7 slope of phase boundaries in isothermal sections
11.8 the effect of a pressure difference between two phases
12 sharp and gradual phase transformations
12.1 experimental conditions
12.2 characterization of phase transformations
12.3 microstructural character
12.4 phase transformations in alloys
12.5 classification of sharp phase transformations
12.6 applications of schreinemakers’ projection
12.7 scheil’s reaction diagram
12.8 gradual phase transformations at fixed composition
12.9 phase transformations controlled by a chemical potential
13 transformations in closed systems
13.1 the phase field rule at constant composition
13.2 reaction coefficients in sharp transformations
for p = c +
13.3 graphical evaluation of reaction coefficients
13.4 reaction coefficients in gradual transformations
for p = c
13.5 driving force for sharp phase transformations
13.6 driving force under constant chemical potential
13.7 reaction coefficients at constant chemical potential
13.8 compositional degeneracies for p = c
13.9 effect of two compositional degeneracies for p = c .
14 partitionless transformations
14.1 deviation from local equilibrium
14.2 adiabatic phase transformation
14.3 quasi-adiabatic phase transformation
14.4 partitionless transformations in binary system
14.5 partial chemical equilibrium
14.6 transformations in steel under quasi-paraequilibrium
14.7 transformations in steel under partitioning of alloying elements
15 limit of stability and critical phenomena
15.1 transformations and transitions
15.2 order–disorder transitions
15.3 miscibility gaps
15.4 spinodal decomposition
15.5 tri-critical points
16 interfaces
16.1 surface energy and surface stress
16.2 phase equilibrium at curved interfaces
16.3 phase equilibrium at fluid/fluid interfaces
16.4 size stability for spherical inclusions
16.5 nucleation
16.6 phase equilibrium at crystal/fluid interface
16.7 equilibrium at curved interfaces with regard to composition
16.8 equilibrium for crystalline inclusions with regard to composition
16.9 surface segregation
16.10 coherency within a phase
16.11 coherency between two phases
16.12 solute drag
17 kinetics of transport processes
17.1 thermal activation
17.2 diffusion coefficients
17.3 stationary states for transport processes
17.4 local volume change
17.5 composition of material crossing an interface
17.6 mechanisms of interface migration
17.7 balance of forces and dissipation
18 methods of modelling
18.1 general principles
18.2 choice of characteristic state function
18.3 reference states
18.4 representation of gibbs energy of formation
18.5 use of power series in t
18.6 representation of pressure dependence
18.7 application of physical models
18.8 ideal gas
18.9 real gases
18.10 mixtures of gas species
18.11 black-body radiation
18.12 electron gas
19 modelling of disorder
19.1 introduction
19.2 thermal vacancies in a crystal
19.3 topological disorder
19.4 heat capacity due to thermal vibrations
19.5 magnetic contribution to thermodynamic properties
19.6 a simple physical model for the magnetic contribution
19.7 random mixture of atoms
19.8 restricted random mixture
19.9 crystals with stoichiometric vacancies
19.10 interstitial solutions
20 mathematical modelling of solution phases
20.1 ideal solution
20.2 mixing quantities
20.3 excess quantities
20.4 empirical approach to substitutional solutions
20.5 real solutions
20.6 applications of the gibbs–duhem relation
20.7 dilute solution approximations
20.8 predictions for solutions in higher-order systems
20.9 numerical methods of predictions for higher-order systems
21 solution phases with sublattices
21.1 sublattice solution phases
21.2 interstitial solutions
21.3 reciprocal solution phases
21.4 combination of interstitial and substitutional solution
21.5 phases with variable order
21.6 ionic solid solutions
22 physical solution models
22.1 concept of nearest-neighbour bond energies
22.2 random mixing model for a substitutional solution
22.3 deviation from random distribution
22.4 short-range order
22.5 long-range order
22.6 long- and short-range order
22.7 the compound energy formalism with short-range order
22.8 interstitial ordering
22.9 composition dependence of physical effects
references
index
展开全部
书友推荐
- >
烟与镜
烟与镜
¥20.6¥48.0 - >
上帝之肋:男人的真实旅程
上帝之肋:男人的真实旅程
¥19.3¥35.0 - >
月亮虎
月亮虎
¥17.8¥48.0 - >
二体千字文
二体千字文
¥16.0¥40.0 - >
姑妈的宝刀
姑妈的宝刀
¥11.4¥30.0 - >
莉莉和章鱼
莉莉和章鱼
¥18.1¥42.0 - >
中国人在乌苏里边疆区:历史与人类学概述
中国人在乌苏里边疆区:历史与人类学概述
¥24.0¥48.0 - >
李白与唐代文化
李白与唐代文化
¥9.9¥29.8
本类畅销
-
2022图书×抽奖盲袋
¥9.9¥25 -
2023读书月阅读盲盒——天黑，闭眼，刀谁？
¥42.3¥158 -
-
2022读者节纪念徽章-三星会员专属
¥45¥45.6 -
2023读书月阅读盲盒——我什么场面没见过？
¥42.3¥158 -
2023读书月阅读盲盒——去码头整点什么薯条？
¥42.3¥158
